Loading page content…
Loading page content…
Loading contract search results…
Loading contract details…
| Source: | Find a Tender Service (FTS) |
| Notice Type: | Award notice |
| Buyer: | NHS Commercial Solutions |
| Main Category: | Works |
| Procurement Method: | Open procedure |
| Tender Status: | Closed |
| Estimated Value (ex. VAT): | Not specified |
| Release Date: | 4 November 2025 |
| Application Deadline: | — |
| Procurement ID (OCID): | ocds-h6vhtk-04ca23 |
| Notice Reference: | 070841-2025 |
All 3 notices for this procurement, oldest first.
Framework Agreement for the provision of Modular & Pre-Fabricated Buildings Solutions and Associated Services
Framework Agreement for Modular & Prefabricated Building Solutions and Associated Services
Framework Agreement for Modular & Prefabricated Building Solutions and Associated Services
Earlier notices predate the Procurement Act 2023 (commenced 24 Feb 2025) and therefore don't carry UK1–UK17 codes.
View Original Notice
Access the full notice on the official portal
Awarded to (42 suppliers)
| Award status: | Active |
This contract is for the establishment of a Modular Building Framework to supply, design, construct, and maintain modular buildings for all public sector facilities including; educational establishments, or healthcare environments. The framework will cover the provision of high-quality, sustainable, and flexible modular building solutions, which may include: LOT DETAILS A key objective for this Framework Agreement is to cover the most comprehensive range possible of Modular & Prefabricated Building Solutions. To achieve this, the Framework Agreement Service Requirements have been broken down into the following lots. a. Lot 1: Consultancy Services; b. Lot 2: Modular & Prefabricated Building Services; and c. Lot 3: Managed Services LOT 1: CONSULTANCY SERVICES The range of consultancy services will include the following, but not restricted to: i. Surveys, ii. Quantity Surveyor, iii. Planning and Valuation, iv. Drawing, Design and Architectural Services, v. Health & Safety, vi. Multi-disciplinary Engineering, vii. Programme and Project Management, viii. Cost Scheduler, ix. Contract Management, x. Quality Controller. Lot 2: Modular & Prefabricated Building Services The Services shall include but shall not be limited to the design, supply, delivery, construction/installation and maintenance of both temporary and permanent Modular & Prefabricated Buildings, whether capital purchased, Leased or Hired. The Supplier will also offer any enablement works required for preparing sites, consultancy services including but not limited to obtaining permissions, provisioning utilities and Digital infrastructure, supplying furniture and consumables. LOT 3: Managed Services Suppliers will offer a combination of the services offered under Lot 1 and/or Lot 2 and other services that may be associated with them. The other associated services may include the following: Services shall include preliminary Modular and Prefabricated Building Solutions (as in on Lot 2) and additionally i. Managed Equipment Service: This may include but not be limited to, Theatres, Diagnostic Equipment, Multi-Functional Devices, Radiology Scanners, Security Scanners, Kiosk/Digital Displays, Computers and IT peripheral, furniture and utility Equipment. And/or ii. Staffing Solution: Recruitment, deploy and management of medical/non-medical professional services. And/or iii. Sterile Services: This may include but not be limited to, providing medical equipment sterilisation services, Computers and IT peripheral, furniture and utility Equipment.
Suppliers will offer a range of Professional and Consultancy Services, including but limited to, to scope, conduct surveys, recommend solutions, aid in developing business cases, plan, enable, manage projects and contracts, monitor compliance. The range of consultancy services will include the following, but not restricted to: • Consultancy Services associated with Modular Building services, • Construction (Design and Management) • Architect, • Civil Engineer, • Structural Engineer, • Mechanical Engineer, • Electrical Engineer, • Building Services, • Acoustic Engineer, • Principal Designer, • Town Planning Consultant, • BREEAM Assessment, • Surveys, • Topographical Survey, • Ground Penetrating Radar, • Utilities Desktop, • Detailed UXO risk assessment report, • Phase 1 Geo-environmental desk study, • Phase 2 Intrusive investigations, • CCTV Drainage, • Percolation Test, • WAC Testing, • Plate Testing, • Flood Risk Assessment, • Arboriculture, • Suds Assessment, • Ecology, • Air Permeability, • Indoor Air Quality, • Security Needs Assessment, • Desk-Based Site Audit, PTAI & Development of BREEAM Travel Plan, • Student Survey Development & Analysis, • Mat01 - LCA Works, • Wst05 - Climate Change Risk Assessment, • Le02-Le05 – Ecology, • Polo3 - Floor Risk Assessment & Drainage Strategy, • Quantity Surveyor, • Planning and Valuation, • Drawing, Design and Architectural Services, • Health & Safety, • Multi-disciplinary Engineering, • Programme and Project Management, • Cost Scheduler, • Contract Management, • Quality Controller, • Energy and Sustainability Training, • Energy Audits, • Cost comparisons, • Savings assessments, • Strategic documents, • MEP Services, • Hydrology, • Fire Safety, • Transport, • Noise, Air Quality, Lighting & Odour, • Geotechnical, • Fire Engineering, • Landscaping Design, • Building Services Management, • Environmental Management, • Estimating, • Pre-Construction Management, • Master Planning, • Estates Strategy, • Health Planning, • Business Case Authoring, • BREEAM Consultancy, • NZC Consultancy, • Town Planning, • LIDAR Scanning, • BIM Consultancy, • CDM Principal Designer, • CDM Principal Contractor. Additional information: Price is not the only award criterion and all criteria are stated only in the procurement documents
The Services shall include but shall not be limited to the design, supply, delivery, construction/installation and maintenance of both temporary and permanent Modular & Prefabricated Buildings, whether capital purchased, Leased or Hired. The Supplier will also offer any enablement works required for preparing sites, consultancy services including but not limited to obtaining permissions, provisioning utilities and Digital infrastructure, supplying furniture and consumables. The Suppliers appointed under this Framework Agreement comply with a wide range of standards and regulations, for example – • Modern Method of Construction (MMC); • Passivhaus; • Ligature-proof/Anti-ligature Furniture and Fixture; • Building Information Modelling (BIM); • Health Building Note (HBN); • Health Technical Memoranda (HTM); • Building Regulations and the Education (School Premises) Regulations 1999; • ‘School-specific Brief’ in the Output Specification 2017: ESFA Employer’s Requirements part C. Additional information: Price is not the only award criterion and all criteria are stated only in the procurement documents
Suppliers will offer a combination of the services offered under Lot 1 and/or Lot 2 and other services that may be associated with them. The other associated services may include the following: Services shall include, but shall not be limited to – i. Managed Equipment Service: This may include but not be limited to, Theatres, Diagnostic Equipment, Multi-Functional Devices, Radiology Scanners, Security Scanners, Kiosk/Digital Displays, Computers and IT peripheral, furniture and utility Equipment. ii. Staffing Solution: Recruitment, deploy and management of medical/non-medical professional services. iii. Sterile Services: This may include but not be limited to, providing medical equipment sterilisation services, Computers and IT peripheral, furniture and utility Equipment. Additional information: Price is not the only award criterion and all criteria are stated only in the procurement documents
Pipeline status
Not addedImports the contract into your BidWriter pipeline · Qualify before you commit to bid
Need help writing this bid?
Our specialists write winning tender responses. Free consultation, no obligation.
Book a free consultation →