Exhaust and Inflame Gas Analyser (3 Lots)

Award outcome

Description

To support overall fundamental and applied research activity, proposals are requested for a gas analysis system for exhaust and inflame gas composition measurements to be utilised across all combustion facilities on site as well as potentially other offsite facilities. Additional analysers The tender is divided into separate Lots: LOT 1: Focuses on standard combustion gases and inflame measurements (ideally including space for additional analyser under Lot 2 and Lot 3). The system needs to be able to measure gases according to 'Table 2.1 - LOT 1 gas analysers required' LOT 2: Covers additional requirements for hydrogen and methane analysis for process gas monitoring (as a standalone analyser or integrated into LOT 1). With gas concentration encountered summarised in "Table 2.2. Approximate gas compositions encountered on site (typically values/upper ranges)" in the light blue boxes. LOT 3: Covers ultra low level (ppb) trace gas analysis of sulphur compounds in natural gas, CO2 stream or flue gas, to include at the lowest range approximately 0-50ppb (as a standalone analyser or integrated into LOT 1 or LOT 2). The purpose of this analyser is process monitoring of MCFC feed gas quality. The species of interests include SO2 (essential requirement), and it is an advantage if it can also measure other sulphur containing compounds such as: H2S, COS, CS2. With gas concentration encountered summarised in "Table 2.2. Approximate gas compositions encountered on site (typically values/upper ranges)" in the light blue boxes. Additional information: All tender documents, correspondence & tender returns must be conducted through the In-tend site, via the link shown above

Links & Documents

About UNIVERSITY OF SHEFFIELD

Published contracts in the last 12 months

Similar contracts