Loading page content…
Loading page content…
13 matching contracts · Updated daily · Contracts Finder + Find a Tender Service
21-SJM-065 Composite Materials Press We are seeking a supplier that can supply, deliver and install a Composite materials press. The Composite Materials press is needed for projects within the area of advanced materials at the University of Portsmouth. The press will be used to produce a range of composite materials, including those with natural and synthetic fibres and other types of reinforcement. These facilities are to be integrated into research activities, teaching activities, and industrial engagement. The press sought must meet technical and size requirements including: 1. Equipped with heating and cooling platens with maximum heating capacity up to 400 C. 2. Minimum: 50 tonnes of compaction force/5 MPa of compaction pressure 3. Platen size dimensions : 400 mm x 400 mm to 500mm x 500mm 4. Floor area (maximum): 1800 x 1200 mm2 5. Max height: 1950mm and max width: 1200 mm 6. When packaged (including any crates, pallets, beams or other supporting materials as well as necessary equipment to move the items) must fit through doorway: height 2000mm x width 1200mm 7. Max weight 1,100 kg 8. Stroke: 300 mm or above 9. Have programmable temperature settings and programmable temperature cycles 10. Have programmable pressure settings and programmable pressure cycle 11. Have adjustable strokes 12. Equipped with data display and defects display 13. Equipped with automatic, manual selector and data acquisition system Further details explained within the ITT. Suppliers are expected to demonstrate their equipment via Video link, and provide suitable samples. See ITT for further details. A Supplier questionnaire will be used for a suitability assessment. Note this tender was advertised previously but failed to progress. The Specification has been updated and changed. To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
21-SJM-104 Acting Services - Simulated Patient Actors The University of Portsmouth School of Health and Care Professions teaches students across a range of courses including our Association for Simulated Practice in Healthcare (ASPiH) accredited Nursing (Adult) programme. We are seeking a provider of standardised patient actors to support our programmes, along with an additional requirement for session facilitators and scenario planning. We require agreed levels of service and fixed payment rates. Suppliers must be ablet to meet all of our mandatory requirements listed in the tender documents To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
21-SJM-104 Acting Services - Simulated Patient Actors The University of Portsmouth School of Health and Care Professions teaches students across a range of courses including our Association for Simulated Practice in Healthcare (ASPiH) accredited Nursing (Adult) programme. We are seeking a provider of standardised patient actors to support our programmes, along with an additional requirement for session facilitators and scenario planning. We require agreed levels of service and fixed payment rates. Suppliers must be ablet to meet all of our mandatory requirements listed in the tender documents To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
21-SJM-104 Acting Services - Simulated Patient Actors The University of Portsmouth School of Health and Care Professions teaches students across a range of courses including our Association for Simulated Practice in Healthcare (ASPiH) accredited Nursing (Adult) programme. We are seeking a provider of standardised patient actors to support our programmes, along with an additional requirement for session facilitators and scenario planning. We require agreed levels of service and fixed payment rates. Suppliers must be ablet to meet all of our mandatory requirements listed in the tender documents To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
Flexible manufacturing, Robotics, Sensors for teaching equipment and Control systems teaching equipment. The University of Portsmouth is seeking Teaching equipment for a newly established Robotics and Automation laboratory. This is to support delivery and practical work associated with various modules in the broader robotics and automation subject area. Robotics and automation teaching equipment is envisaged to support the delivery of various modules across several levels of study (undergraduate and postgraduate). The lab needs to be equipped with a range of contemporary industrial robots, with integrated controllers and variable degrees of freedom, as well as allowing students to have hands-on experience in control systems and sensor equipment. A flexible manufacturing system with high layout flexibility, which can be easily expanded, is invaluable for experimentation and project-based learning. Delivery, installation and training are anticipated to take place in approx January-March 2024. This tender is in 4 Lots Lot 1 - Flexible manufacturing/automation system Lot 2 - Robots/Robot arms Lot 3 - Sensors teaching equipment Lot 4 - Control systems teaching equipment Note: Each lot will be awarded individually. Sellers are invited to bid for one lot or multiple lots To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
Flexible manufacturing, Robotics, Sensors for teaching equipment and Control systems teaching equipment. The University of Portsmouth is seeking Teaching equipment for a newly established Robotics and Automation laboratory. This is to support delivery and practical work associated with various modules in the broader robotics and automation subject area. Robotics and automation teaching equipment is envisaged to support the delivery of various modules across several levels of study (undergraduate and postgraduate). The lab needs to be equipped with a range of contemporary industrial robots, with integrated controllers and variable degrees of freedom, as well as allowing students to have hands-on experience in control systems and sensor equipment. A flexible manufacturing system with high layout flexibility, which can be easily expanded, is invaluable for experimentation and project-based learning. Delivery, installation and training are anticipated to take place in approx January-March 2024. This tender is in 4 Lots Lot 1 - Flexible manufacturing/automation system Lot 2 - Robots/Robot arms Lot 3 - Sensors teaching equipment Lot 4 - Control systems teaching equipment Note: Each lot will be awarded individually. Sellers are invited to bid for one lot or multiple lots To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
22-SJM-074 - Metallurgical sample preparation equipment Cutting Equipment, Mounting Equipment, Grinding and polishing Equipmnet/Cleaning Equipment for metallic/other sample preparation Metallurgical sample preparation equipment is needed for teaching, research and projects in the area of advanced materials and manufacturing at the University of Portsmouth. We are looking for a supplier that can supply the following : One item of cutting equipment, One item of mounting equipment, One item of grinding and polishing equipment and/or one item of cleaning equipment for metallic and other sample preparation. Final requirements will be advised at award point and subject to budget. Supplier is expected to supply, deliver, and locate, and install the product in room of choice. Suppliers must be able to supply all pieces of equipment and meet the mandatory requirements listed in the tender documents. Delivery , installation and training are anticipated to take place in January-March 2024. To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
22-SJM-073 Tribological Testing Equipment Tribological testing equipment is needed for teaching, research and projects in the area of advanced materials and manufacturing at the University of Portsmouth. We are looking for a versatile tribometer, with a range of functionalities, that is easy to use. In addition to above suppliers are required to also provide options of compatible auxiliary equipment and enhancement products that provide additional functionality and specialist testing environments. This may include additional equipment to allow for specialist testing (high temperature, vacuum, etc.) and/or equipment for surface measurements, characterisation and/or evaluation. Options will be considered in terms of need and all must be priced as options and are subject to budget. Supplier is expected to supply, deliver, locate all products to room of choice. This is ground floor and must meet mandatory requirements set out in the tender documents To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
22-SJM-073 Tribological Testing Equipment Tribological testing equipment is needed for teaching, research and projects in the area of advanced materials and manufacturing at the University of Portsmouth. We are looking for a versatile tribometer, with a range of functionalities, that is easy to use. In addition to above suppliers are required to also provide options of compatible auxiliary equipment and enhancement products that provide additional functionality and specialist testing environments. This may include additional equipment to allow for specialist testing (high temperature, vacuum, etc.) and/or equipment for surface measurements, characterisation and/or evaluation. Options will be considered in terms of need and all must be priced as options and are subject to budget. Supplier is expected to supply, deliver, locate all products to room of choice. This is ground floor and must meet mandatory requirements set out in the tender documents To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
22-SJM-073 Tribological Testing Equipment Tribological testing equipment is needed for teaching, research and projects in the area of advanced materials and manufacturing at the University of Portsmouth. We are looking for a versatile tribometer, with a range of functionalities, that is easy to use. In addition to above suppliers are required to also provide options of compatible auxiliary equipment and enhancement products that provide additional functionality and specialist testing environments. This may include additional equipment to allow for specialist testing (high temperature, vacuum, etc.) and/or equipment for surface measurements, characterisation and/or evaluation. Options will be considered in terms of need and all must be priced as options and are subject to budget. Supplier is expected to supply, deliver, locate all products to room of choice. This is ground floor and must meet mandatory requirements set out in the tender documents To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
23/SJM/005 Mechanical Testing Equipment Mechanical testing equipment is needed for teaching, research and projects in the area of advanced materials and manufacturing at the University of Portsmouth. We are looking for two versatile testing machines, with a range of functionalities, that are easy to use. The lab needs to be equipped with mechanical testing equipment divided into two lots: Lot 1 - Mechanical testing equipment 100kN Lot 2 - Mechanical testing equipment 1kN Suppliers may bid for one or both items, each item will be awarded separately. To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
We are seeking a particle sizer, also called Dynamic Light Scattering (DLS), equipped with advanced technology to analyse the size distribution of Nano and micro particles reliably and accurately. The particle sizer should be accompanied by user-friendly software for swift and precise analysis. It should be capable of measuring sizes down to a fraction of a nanometre and up to 5um or higher. In addition to size measurement, the unit must have the capability to identify particle concentrations in fluids ranging from 0.0001% to 40%, ensuring versatility in its applications. Supplier is expected to supply, deliver and install/setup all products to room of choice. Particle Sizer Must : Suppliers must meet the requirements below: Technical Essential o Reliable and accurate nano to micro particle size measurements that are suspended in fluids in concentration as low as 0.0001 % and up to 40% o The delivery must be guaranteed no later than 15th July 2024 To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Please find attached the tender documents for 23/CH/068 Particle Sizer. Please give plenty of time when uploading your return, to allow for any unforeseen issues. Please also note, that late returns will not be allowed. Please note, as per tender procedure, your return can not be viewed by any person until after the return date and time has elapsed. Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed
We are seeking a particle sizer, also called Dynamic Light Scattering (DLS), equipped with advanced technology to analyse the size distribution of Nano and micro particles reliably and accurately. The particle sizer should be accompanied by user-friendly software for swift and precise analysis. It should be capable of measuring sizes down to a fraction of a nanometre and up to 5um or higher. In addition to size measurement, the unit must have the capability to identify particle concentrations in fluids ranging from 0.0001% to 40%, ensuring versatility in its applications. Supplier is expected to supply, deliver and install/setup all products to room of choice. Particle Sizer Must : Suppliers must meet the requirements below: Technical Essential o Reliable and accurate nano to micro particle size measurements that are suspended in fluids in concentration as low as 0.0001 % and up to 40% o The delivery must be guaranteed no later than 15th July 2024 To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below: https://in-tendhost.co.uk/port/ Please find attached the tender documents for 23/CH/068 Particle Sizer. Please give plenty of time when uploading your return, to allow for any unforeseen issues. Please also note, that late returns will not be allowed. Please note, as per tender procedure, your return can not be viewed by any person until after the return date and time has elapsed. Additional information: Is a Recurrent Procurement Type? : No
Value undisclosed