21-SJM-104 Acting Services - Simulated Patient Actors
The University of Portsmouth School of Health and Care Professions teaches students across a range of courses including our Association for Simulated Practice in Healthcare (ASPiH) accredited Nursing (Adult) programme.
We are seeking a provider of standardised patient actors to support our programmes, along with an additional requirement for session facilitators and scenario planning. We require agreed levels of service and fixed payment rates.
Suppliers must be ablet to meet all of our mandatory requirements listed in the tender documents
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
University of Portsmouth e-TenderingSouth EastWAC-209586
Flexible manufacturing, Robotics, Sensors for teaching equipment and Control systems teaching equipment.
The University of Portsmouth is seeking Teaching equipment for a newly established Robotics and Automation laboratory. This is to support delivery and practical work associated with various modules in the broader robotics and automation subject area.
Robotics and automation teaching equipment is envisaged to support the delivery of various modules across several levels of study (undergraduate and postgraduate). The lab needs to be equipped with a range of contemporary industrial robots, with integrated controllers and variable degrees of freedom, as well as allowing students to have hands-on experience in control systems and sensor equipment. A flexible manufacturing system with high layout flexibility, which can be easily expanded, is invaluable for experimentation and project-based learning.
Delivery, installation and training are anticipated to take place in approx January-March 2024.
This tender is in 4 Lots
Lot 1 - Flexible manufacturing/automation system
Lot 2 - Robots/Robot arms
Lot 3 - Sensors teaching equipment
Lot 4 - Control systems teaching equipment
Note: Each lot will be awarded individually. Sellers are invited to bid for one lot or multiple lots
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
University of Portsmouth e-TenderingSouth EastWAC-164985
22-SJM-074 - Metallurgical sample preparation equipment
Cutting Equipment, Mounting Equipment, Grinding and polishing Equipmnet/Cleaning Equipment for metallic/other sample preparation
Metallurgical sample preparation equipment is needed for teaching, research and projects in the area of advanced materials and manufacturing at the University of Portsmouth. We are looking for a supplier that can supply the following : One item of cutting equipment, One item of mounting equipment, One item of grinding and polishing equipment and/or one item of cleaning equipment for metallic and other sample preparation. Final requirements will be advised at award point and subject to budget.
Supplier is expected to supply, deliver, and locate, and install the product in room of choice. Suppliers must be able to supply all pieces of equipment and meet the mandatory requirements listed in the tender documents.
Delivery , installation and training are anticipated to take place in January-March 2024.
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
University of Portsmouth e-TenderingSouth EastWAC-164764
22-SJM-073 Tribological Testing Equipment
Tribological testing equipment is needed for teaching, research and projects in the area of advanced materials and manufacturing at the University of Portsmouth. We are looking for a versatile tribometer, with a range of functionalities, that is easy to use.
In addition to above suppliers are required to also provide options of compatible auxiliary equipment and enhancement products that provide additional functionality and specialist testing environments. This may include additional equipment to allow for specialist testing (high temperature, vacuum, etc.) and/or equipment for surface measurements, characterisation and/or evaluation. Options will be considered in terms of need and all must be priced as options and are subject to budget.
Supplier is expected to supply, deliver, locate all products to room of choice. This is ground floor and must meet mandatory requirements set out in the tender documents
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
University of Portsmouth e-TenderingSouth EastWAC-143654
23/SJM/089 Power Electronics Training Equipment
Power Electronics equipment is required for training undergraduate and postgraduate taught students in the areas of Power Engineering and Power Electronics and Drives
The equipment required will be part of our new Renewable Energy and Power Laboratory, which will support training of our students at a range of levels of study. We envisage equipment to be used to train groups of 4-6 students on each hardware module. Each hardware module will be used as an individual teaching station covering a specified set of experiments, and therefore we require each of them to stand alone or be constructed as a bench top unit.
The required equipment consists of two Lots of equipment for training engineering students at undergraduate and postgraduate levels in the following areas.
Lot 1 - Power Engineering
Lot 2- Power Electronics & Drives
We have divided the requirements into two parts: "Power Engineering" and "Power Electronics and Drives" and invite potential suppliers to bid for one or both areas. Lots will be awarded individually.
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
University of Portsmouth e-TenderingSouth EastWAC-123478
The Faculty of Technology at the University of Portsmouth has a requirement for microtesting equipment to support teaching and research activities in the advanced materials laboratory as well as individual and group projects.
The equipment should be suitable for research and innovation work.
Please see specification for more details.
A suitability questionnaire and ITT documents are available for download and completion.
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
University of Portsmouth e-TenderingSouth EastWAC-141672
23/SJM/007 Raman Spectrometer
23/SJM/007 HVLE Framework Lot 3
The School of Pharmacy and Biomedical sciences require a benchtop multi-modal Raman micro-spectrometer for the purpose of analysing various light scattering modes for in-depth analysis of chemical and biological samples. Particularly, we intend to analyze the Raman, dark-field and fluorescence information with both polarized and unpolarized light from the same region of interest.
The Seller is expected to supply, deliver, install the equipment, and must meet the mandatory - Essential criteria.
Restricted to HVLE Lot 3 Suppliers only. Under the UKUPC / NWUPC HVLE Framework - Framework Agreement LAB3162 NW
All Goods must be delivered, installed and accepted by 12th July 2024. Funding is not available after this date.
University of Portsmouth e-TenderingSouth EastWAC-84683
This is a direct award under the NHS SBS Healthcare Planning, Construction consultancy and Ancillary Services framework agreement, for Project Management and Cost Management services for the Student Hub Project.
The University of Portsmouth is looking for an Auditor with proven specialist knowledge that is required for the provision of Audit Services for Research and Innovation projects where such audits are required by the relevant sponsor.
The service required includes the provision of an audit function as required by the terms of the project sponsor on a case by case basis. The majority of the function would be with respect to Horizon Europe and Innovate UK projects but will also include any other funders that require an audit function; provision of management reports in relation to the project; acting as a knowledge base for grant audit issues and assist with audit queries and clarifications from various parties not limited to sponsors, lead partners or other stakeholders.
This will be contracted on a three year plus an additional two year basis.
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
To note - Bidders must hold registered Audit Status as listed on the Register of Statutory Auditors.
University of Portsmouth e-TenderingSouth EastWAC-377439
The University of Portsmouth ('University') is inviting tenders from suitably qualified suppliers to provide marketing and media buying services to develop and implement marketing campaigns. The University's target date for award of contract is 18th March 2024 with service commencement following as soon as possible following the signing of contracts.
The initial contract term will be for 2 years with possibility of extending the term by a further 2 years in increments to be agreed, subject to the agreement and performance of both parties. The form of contract used will be the University's standard terms for the supply of services.
Full details of the requirements are in the Specification document.
Procurement Timetable
Activity Date / time
Issue of Contract Notice / availability of ITT documents 12/01/2024
Clarification Deadline 05/02/2024
Target date for the University to respond to clarification questions 08/02/2024
Tender Return Deadline 19/02/2024
Notification of Presentations 23/02/2024
Presentations W/c 26/02/2024
Notification of award decision and standstill 08/03/2024
Contract concluded with winning supplier 18/03/2024
Target Contract start date Asap
University of Portsmouth e-TenderingSouth EastWAC-389466
23/SJM/005 Mechanical Testing Equipment
Mechanical testing equipment is needed for teaching, research and projects in the area of advanced materials and manufacturing at the University of Portsmouth. We are looking for two versatile testing machines, with a range of functionalities, that are easy to use.
The lab needs to be equipped with mechanical testing equipment divided into two lots:
Lot 1 - Mechanical testing equipment 100kN
Lot 2 - Mechanical testing equipment 1kN
Suppliers may bid for one or both items, each item will be awarded separately.
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
University of Portsmouth e-TenderingSouth EastWAC-385405
We are seeking a particle sizer, also called Dynamic Light Scattering (DLS), equipped with advanced technology to analyse the size distribution of Nano and micro particles reliably and accurately. The particle sizer should be accompanied by user-friendly software for swift and precise analysis. It should be capable of measuring sizes down to a fraction of a nanometre and up to 5um or higher.
In addition to size measurement, the unit must have the capability to identify particle concentrations in fluids ranging from 0.0001% to 40%, ensuring versatility in its applications.
Supplier is expected to supply, deliver and install/setup all products to room of choice.
Particle Sizer Must :
Suppliers must meet the requirements below:
Technical
Essential
o Reliable and accurate nano to micro particle size measurements that are suspended in fluids in concentration as low as 0.0001 % and up to 40%
o The delivery must be guaranteed no later than 15th July 2024
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
Please find attached the tender documents for 23/CH/068 Particle Sizer. Please give plenty of time when uploading your return, to allow for any unforeseen issues.
Please also note, that late returns will not be allowed. Please note, as per tender procedure, your return can not be viewed by any person until after the return date and time has elapsed.
University of Portsmouth e-TenderingSouth EastWAC-81058
The Supplier has been appointed under Lot 2 for Project Management and Lot 4 Quantity Surveyor under the NHS SBS (Healthcare Planning, Construction Consultancy, and Ancillary Services, to provide the following Services:
• PM support for moves planning and moves days.
• Design RIBA Stage 0-4.
The Supplier has been appointed under Lot 2 for Project Management and Lot 4 Quantity Surveyor Services under the NHS SBS Framework (Healthcare Planning, Construction Consultancy and Ancillary Services), to provide the following Services:
Project Management, Contract Administration and Quantity Surveying Services for the St Paul's Annex roof replacement project.
Services to be provided are Project Management/Contract Administration and Quantity Surveying Services.
The scope of works is based on the replacement of the existing roof covering and associated roof repairs, and the refurbishment of the first-floor offices for the St Paul's Annex.
23-SJM-117 - X-Ray Micro CT Scanner
The University of Portsmouth requires a X-ray Micro CT Scanner for teaching and projects in the area of advanced materials .
The equipment will be used to support delivery of modules, courses and projects, and allow users to engage in investigative and individual project work.
Supplier is expected to supply and deliver the product, carry out installation/setup and provide training, including the use of relevant software, mandatory requirements as detailed in the tender documentation.
The University requires suppliers to evaluate 3 samples (samples will be provided). A recorded Demonstration is required.
Must include delivery and installation and set up as required. This includes delivery to the room of choice, and staff training.
Mandatory Technical requirements detailed in the ITT documents
Sellers must be able to demonstrate and confirm that they can meet the delivery deadline stated in the ITT
To Express an Interest in this project please register on the University of Portsmouth In-Tend webpage and express an interest in this project. Please find the weblink for our webpage below:
https://in-tendhost.co.uk/port/
University of Portsmouth e-TenderingSouth EastWAC-354363
Call-Off Contract from NEUPC awarded framework agreement for Sustainable Furniture Solutions with reference FFE2008NE Lot No. 2A for the supply and installation of on campus furniture.