UK Public Sector Contracts & Tenders

Northumbria University intends to directly award a contract for the supply, delivery, and installation of a BMG Labtech CLARIOstar® Plus multi-mode microplate reader to support research for Project 1220794: Sustainable Styles. The procurement covers a specialized analytical system equipped with patented Linear Variable Filter (LVF) Monochromators™ and Enhanced Dynamic Range (EDR) technology. This specific model is required to ensure complete technical and data interoperability with existing established research protocols and identical hardware utilized by lead project partners. The scope includes the proprietary MARS Data Analysis Software and on-site technical training to ensure compliance with the funder's high-throughput data reproducibility standards. To view this notice, please click here: https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=1010010754

Northumbria University entered to a contract for the supply and installation of an OEM Scratch Testing Module (FT-ST04) and a Two-axis Microforce Sensing Probe (range up to 20 mN) with a diamond Berkovich tip. This equipment is an essential upgrade to the existing FemtoTools iO4 nanomechanical testing system located at the NU-PICO facility. The award was made directly to Oxford Instruments NanoTechnology Ltd. as the Original Equipment Manufacturer (OEM) and sole authorized supplier of the FemtoTools iO4 and NMT04 systems. To view this notice, please click here: https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=1010206971

Northumbria University requires upgrade and replacement of X-ray detection hardware and software for existing Tescan Mira 3GM SEM. Updating the detectors with the last generation sensors will ensure future support and repairability in the next 10 years. This contract covers the provision of high-resolution X-ray detectors (EDS), integrated signal processing electronics, and the associated proprietary software suite. The procurement is a technical upgrade to the existing Tescan Mira 3GM Scanning Electron Microscope (SEM). It ensures the replacement of obsolete components with current-generation technology to maintain the instrument’s analytical capabilities and structural integrity. Proprietary Integration: The existing Tescan Mira 3GM architecture uses a specific interface and software kernel owned by Oxford Instruments. Only Oxford Instruments can provide detectors that are natively compatible with this system without requiring unverified and high-risk modifications to the microscope's vacuum chamber and electronic bus. To view this notice, please click here: https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=1010164284

Northumbria University has procured a Micro Compounder, an Injection Moulder and a Platen Press to support advanced research into novel nanocomposites-materials that combine nanoscale fillers with polymer matrices to achieve enhanced physical properties. - The Micro Compounder that capable of processing very small quantities of polymers and additives, ideal for R&D involving expensive or rare substances; - The Injection Moulder that allows for the creation of standardised test specimens with tight control over temperature, pressure, and mould geometry; - The Platen Press that offers programmable pressure and heat settings to form composite sheets or layered samples. The machines will be used in conjunction with each other and physically compatible for a single user to operate. The transfer of samples from a Micro Compounder to either Platen press or Injection Moulder is achievable with minimal user intervention and without requiring any additional tools or adaptors. Following a competitive tender, the requirement was split to ensure technical compliance. Items 1 & 2 were awarded to the UK distributor, while Item 3 was awarded directly to the OEM as the sole authorized provider for that specific item. This purchase includes delivery; offloading; positioning; installation; commissioning; onsite training and 2-year Service and Maintenance contract. To view this notice, please click here: https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=1011634128

The Contract awarded for supply of Nanoindenter or picoindenter to fit inside our Scanning Electron Microscope (SEM model: Tescan Mira 3 with GM chamber). This instrument will allow users to map surface mechanical and tribological properties of materials and correlate them to structural, morphological and chemical properties.

The University is completing the build of three 6U CubeSats as part of a technology demonstration mission funded by the UK Space Agency. This mission will see the launch of two 6U CubeSats into a sun-synchronous Low Earth Orbit (expected 450 km altitude) in 2026/7. The third 6U CubeSat is our reference model. The payload being developed for assembly integration and testing within the 6U CubeSat bus is a 2U laser communications terminal. The mission goal will be to demonstrate inter-satellite laser optical communications across a range of link lengths up to 1000 km and at least 1 Gbps data transfer rates between the 6U CubeSats. There will be a requirement for a number of ground-passes for frequent data downlink of the experimental results log files and the mission is anticipated to last for 1 year, including a deorbit final stage.

Northumbria University Faculty of Health & Life Sciences is at the forefront of educating tomorrow's health professionals. A leading provider of education in nursing, allied health, social work and public health programmes the Faculty has more then 13,000 students and over 400 academic and technical staff. As part of the continued development of our state of the art clinical skills facilities we are now seeking to procure 3D anatomy tables to assist with the teaching of gross anatomy as well as microscopic anatomy, physiology and histology.

Following recent purchase of Sequencing System (MiSeq i100 Plus) including 1 year of upgraded warranty and three years maintenance cover, Northumbria University specified the requirement for a multi-year supply of the list of consumables necessary for day-to-day operation of MiSeq i100 Plus System. The consumables will also cover supply for existing NovaSeq and MiSeq instruments. The complete list of required consumables is detailed in Tender documents. The duration of the Call-off Agreement is 3 years.