UK Public Sector Contracts & Tenders

KBS Maritime are looking to procure a double busbar 11kV switchboard compliant with latest IEC standards. The switchboard shall consist of approximately 18no circuit breakers with a busbar rated for a minimum of 2000A . Preference shall be given to ENA approved switchgear with an AFLR rating. The switchboard range shall be of a proven design and have a demonstrable record of reliability in service and shall be supported by the manufacture for 15+ years. Condition monitoring and online partial discharge monitoring shall be required throughout the switchboard. Invitations to express interest and complete the first stage of this Restricted Procurement Process.

We shall be looking to procure a double busbar 11kV switchboard compliant with latest IEC standards. The switchboard shall consist of approximately 18no circuit breakers with a busbar rated for a minimum of 2000A . Preference shall be given to ENA approved switchgear with an AFLR rating. The switchboard range shall be of a proven design and have a demonstrable record of reliability in service and shall be supported by the manufacture for 15+ years. Condition monitoring and online partial discharge monitoring shall be required throughout the switchboard.

Portsmouth Naval Base require a Cable Management System (CMS) to supply 450V 60Hz power to some of their vessels. The CMS shall comply with the latest Published Document IEC/PAS 80005-3, Utility connections in port. Part 3: Low Voltage Shore Connection (LVSC). All plugs and socket-outlets shall be in accordance with IEC 60309-1, IEC 60309-5 and section 7.3 of IEC/PAS 80005-3. It shall be designed and built by the manufacturer to include but not be limited to the following parameters. • It shall come complete with jumper cables to allow connection from the CMS to a local Cable Connection Box (CCB). Jumper cables shall comply with IEC/PAS 80005-3 section 7.4. • The body of the CMS shall be a cable reel system with power capability up to 1.0MW. This can be achieved with one four cable unit or two, two cable units. • Estimated cable length of 30-60 meters. • Moveable unit required for relocation as required.

Portsmouth Naval Base require a Cable Management System (CMS) to supply 450V 60Hz power to some of their vessels. The CMS shall comply with the latest Published Document IEC/PAS 80005-3, Utility connections in port. Part 3: Low Voltage Shore Connection (LVSC). All plugs and socket-outlets shall be in accordance with IEC 60309-1, IEC 60309-5 and section 7.3 of IEC/PAS 80005-3. It shall be designed and built by the manufacturer to include but not be limited to the following parameters. • It shall come complete with jumper cables to allow connection from the CMS to a local Cable Connection Box (CCB). Jumper cables shall comply with IEC/PAS 80005-3 section 7.4. • The body of the CMS shall be a cable reel system with power capability up to 1.0MW. This can be achieved with one four cable unit or two, two cable units. • Estimated cable length of 30-60 meters. • Moveable unit required for relocation as required.

For Rewire, Lighting and Fire Alarm install for a building within Portsmouth Naval Base. This is the initial expression of interest for bidders. Those that meet the criteria of this initial phase will be invited to participate in a final competition.

For Rewire, Lighting and Fire Alarm install for a building within Portsmouth Naval Base. This is the initial expression of interest for bidders and all bidders who can meet the criteria within the Procurement documents will be taken through to the tender stage.

This Contract is for a single supplier for the provision of the Supply of High Vacuum Specialist Extraction Units. The contractor shall design, manufacture and deliver containerised LEV and accessories. Equipment in the units processing GRP dust shall be appropriately ATEX rated, certified, and labelled in accordance with the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) 2002. This will include: 6 No. Small GRP Dust Extraction Units 2 No. Large GRP Dust Extraction Units 6 No. Small Mild & Stainless Steel Hotwork Extraction Units 2 No. Large Mild & Stainless Steel Hotwork Extraction Units 10 No. Small High-Pressure Fresh Units 10 No. Large high-pressure Fresh Units These are to be delivered over a 2 year period.

This Contract is for a single supplier for the provision of the Supply of High Vacuum Specialist Extraction Units. The contractor shall design, manufacture and deliver containerised LEV and accessories. Equipment in the units processing GRP dust shall be appropriately ATEX rated, certified, and labelled in accordance with the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) 2002. This will include: 6 No. Small GRP Dust Extraction Units 2 No. Large GRP Dust Extraction Units 6 No. Small Mild & Stainless Steel Hotwork Extraction Units 2 No. Large Mild & Stainless Steel Hotwork Extraction Units 10 No. Small High-Pressure Fresh Units 10 No. Large high-pressure Fresh Units These are to be delivered over a 2 year period.

Proposed to replace the existing caisson to 1 Basin. Proposed works to be undertaken as per the design and surveys approved with Historic England and Crown Estates. Install perimeter CPNI fencing to secure the site for the duration of the project. Installation of temporary cofferdams to the East and West that will not impact the historic fabric. Dewater and inspect and survey the 1 Basin stonework. Monitor historic seawalls and ground water levels during the works. Undertake stone wall repairs in accordance with Historic England detail specification and approval. Replace the penstock gate with electric operated replacement with civil works and electrical supply required to operate. Demolition and removal of the existing caisson constructure to 1 Basin. Repairs to the caisson groove and prepare for replacement caisson arrival (by others) removal all structural supports. Remove and survey the condition of the road bridge. Repair works to the sill and stone repairs to match the existing structure to the detailed specifications to Historic England specification. Install a temporary foot bridge during the project. Refurbishment and load testing of fairleads and bollards and leave in full working order for ongoing operations. Clean, survey and remedial repairs to historic brickwork culvert after dewatering. Remove the temporary cofferdams and refit road bridge after caisson has been replaced and all works to the bridge has been completed.

Proposed to replace the existing caisson to 1 Basin. Proposed works to be undertaken as per the design and surveys approved with Historic England and Crown Estates. For full list of Civils work required see section II.2.4 for full information.

Concrete repairs & installation of ICCP

Concrete repairs & installation of ICCP

This is for LV and HV electrical works within Substation at Portsmouth Naval Base.

This is for LV and HV electrical works within Substation at Portsmouth Naval Base.

This project relates to the High Pressure Salt Water (HPSW) fire suppression system at 14 and 15 dock. A new HPSW system is required for vessels in wet dock and dry dock for fire suppression while maintenance work is ongoing. The initial phase of this project is survey & design, the contract may extend to build however this will be determined once the solution is established. Please note the information in this notice relates to whole project if build is included. The aim of the initial phase is to survey and determine all the unknown variables and to produce a detailed design of a permanent solution for vessel fire suppression. Scope of the works may also include removal of any existing redundant systems required to install the new system, ground and engineering works required enable the system to be used as intended.

This project relates to the High Pressure Salt Water (HPSW) fire suppression system at 14 and 15 dock. A new HPSW system is required for vessels in wet dock and dry dock for fire suppression while maintenance work is ongoing. The initial phase of this project is survey & design, the contract may extend to build however this will be determined once the solution is established. Please note the information in this notice relates to whole project if build is included. The aim of the initial phase is to survey and determine all the unknown variables and to produce a detailed design of a permanent solution for vessel fire suppression. Scope of the works may also include removal of any existing redundant systems required to install the new system, ground and engineering works required enable the system to be used as intended.

3G Football pitch replacement and conversion of hockey pitch into a multi-sports pitch

3G Football pitch replacement and conversion of hockey pitch into a multi-sports pitch