Loading page content…
Loading page content…
| Source: | Contracts Finder |
| Buyer: | Hailsham Town Council - Main Number |
| Main Category: | Works |
| Procurement Method: | Open procedure (above threshold) |
| Tender Status: | Complete |
| Estimated Value (ex. VAT): | £38,500 |
| Release Date: | 18 May 2022 |
| Application Deadline: |
Pipeline status
Not addedContract imported automatically · AI writes the response
Application Deadline
24 June 2022
Closed
Estimated Value
£38,500
Need help writing this bid?
Our specialists write winning tender responses. Free consultation, no obligation.
Book a free consultation →| 24 June 2022 |
| Procurement ID (OCID): | ocds-b5fd17-16cdb545-d3ec-43f8-a687-fd6a0eb0368f |
| Notice Reference: | 399ec046-590a-4bac-85f2-ed5715d47a3e-539095 |
View Original Notice
Access the full notice on the official portal
Contact Details - John Harrison John.harrison@hailsham-tc.gov.uk 01323 841702 Hailsham Town Council Inglenook, Market Street, Hailsham East Sussex BN27 2AE Description or works: The works consist of the illumination of the Hailsham Active Circuit within the Western Road Recreation grounds. The electrical works consist of: - • Provision of a new UKPN electrical supply • Associated ground works for the UKPN installation • Provision of new distribution arrangement in kiosk • Provision of frost protection heater to kiosk • Provision of new illumination to Active circuit • Provision of lighting control • Associated ground works to column erection • Testing and commissioning • Provision of record documentation This specification has been written at a design stage before the completion of the active circuit installation works and makes the assumption that the kiosk in preparation for the UKPN supply has been erected and furnished with the 3 no outgoing ducts and the required twin wall ducting installation to the entire perimeter of the active circuit as per informed requirement. The Lamp columns cannot exceed 4m height to ensure the installation can be made under permitted development rights. • Commence of the project is subject to additional funding for the project. • The funding bid outcome will be known by 6th September 2022 and therefore quotes are required to be valid to the end of September 2022 Tenders to be sent via email to: john.harrison@hailsham-tc.gov.uk Or via post to: John Harrison, Town Clerk, Hailsham Town Council, Inglenook, Market Street, Hailsham, East Sussex, BN27 2AE Additional information: The successful contractor shall be responsible to ensure that the development of the design from stage 4 information provided and for the design, supply, delivery, installation of plant and materials are included within the tender package. Testing, commissioning, setting to work and all handover documents should also be provided as part of the works. It is the successful contractor's responsibility to ensure that the installation is installed in line with the drawings provided and in accordance with all current regulatory requirements and industry standards including but not limited to all CIBSE/IET guidance. The successful contractor shall carry out the final design and co-ordination of the electrical services as described and to produce fully co-ordinated working drawings. these shall be issued for comment and approval before works are to commence, any works on site before approval shall be at the risk of the successful contractor. Any change to the stage 4 design provided including modifications and relocation of services shall become the responsibility of the successful contractor including warranties for the altered services. Please note that all architectural and structural drawings should be examined to ensure the tenderer fully understands the specific nature of the installation. If these are not included within the tender package, these are to be requested from the poster of the tender information. A site visit must be performed to ensure the site constraints are realised and that the contractor is fully familiar with the site. The works shall comprise of the complete installation as noted on the drawings and specification this shall provide fully working, tested and commissioned systems as required. This includes providing specified performance and environmental conditions, all ancillary items, and sundry items for the installation to operate efficiently and provision for maintenance to be carried out in a safe and practical manner. The works should also be completed in line with all relevant regulations, recommendations, British Standards, Code of Practice and industry recognised methods of installation and workmanship.
Published contracts in the last 12 months
3
total contracts
£290k
total value
£96,667
average contract size
Typical categories